TRANSPARENT HEAT SEALABLE ANTI FOG, ONE SIDE OR BOTH SIDE CORONA TREATED
TREATED SEALABLE LAYER WITH ANTI-FOG
INTER LAYER
OPP CORE LAYER
INTER LAYER
TREATED HEAT SEALABLE LAYER
Description
Transparent heat Sealable anti-fog, one side or both side corona Treated Film-Excellent Cold and Hot Antifog effect on one side and other side printable
Features
Excellent anti-fog Properties
Good Optics
Good Sealing Properties
Good Machinability
Application
FRESH PRODUCTS TO BE KEPT UNDER REFRIGERATION OR ELEVATED TEMPERATURE
THE BIG DIFFERENTIATORS
01
Excellent Anti-fog Performance
Excellent cold and hot antifogging effect on one side and printability on other side
02
Excellent Optics
Finer Print images.
03
Super product visibility
Antimist prevents condensation and ensure excellent product visibility.
04
Excellent Sealing property
Excellent heat seal & hot tack strength
05
Very good machinability
Excellent runnability.
PROPERTIES
TEST METHOD (ASTM)
UNIT
TYPICAL VALUES
HAF-20
HAF-25
HAF-30
HAF-35
HAF-40
PHYSICAL
Thickness
ASTM D 374
MICRON
20
25
30
35
40
Grammage
NTM
gm/m²
18.2
22.8
27.3
31.8
36.4
Yield
NTM
m²/kg
24.9
44.0
36.6
31.4
27.4
Thickness variation
%(±)
3
SURFACE
Treatment Level (min)
ASTM D 2578
dyne/cm
38
OPTICAL
Haze
ASTM D 1003
%
2.0-3.0
Gloss
ASTM D 2457
-
85-90
MECHANICAL
Coefficient Of Friction
ASTM D 1894
FILM/FILM
0.20-0.30
Tensile Strength
MD
TD
ASTM D 882
kg/cm²
1200-1700
2500-2800
Modulus
MD
TD
ASTM D 882
kg/cm²
16000-19000
26000-29000
Elongation
MD
TD
ASTM D 882
%
140-180
40-80
THERMAL
Shrinkage at 120°C/5min
MD
TD
ASTM D 1204
%
3.0-5.0
1.0-3.0
Seal Initiation Temperature (Max)
NTM
°C
118-122
Sealing Strength (min) at 120ºC/2Bar
NTM
gms/25mm
400-500
BARRIER
Water Vapour Transmission Rate
ASTM F 1249
gm/m²/24h
6.5
6.0
5.5
5.5
Oxygen Gas Transmission Rate
ASTM D 3985
cc/m²/24h
2150
1800
1600
1400
ANTIMIST
Antifog Test
NTM
Rating A to E
E
E
E
E
E
STORAGE & HANDLING
NAHAROPP™ does not require special storage conditions. it is recommended to storage below 30°C in order to avoid any deterioration of the film surface properties. it is advisable to use the material on FIFO basis. The film should be kept at operating environment for 24 hours before processing. material should be use before 3 months from dispatch
FOOD CONTACT
NAHAROPP™ Follow with EC and FDA regulations. MSDS are available on customer request.
DISCLAIMER
The values given in this technical datasheet are typical performance data and are believed to be accurate .These are given in good faith but it is for the customer to satisfy of the suitability for its
own particular purpose. NAHAR POLY FILMS LTD. Suggests to the customer to confirm these values and product compatibility prior to their use and the company offers neither guarantee nor
accept any responsibility for the fitness of the product for any other use.
NTM: NAHAR TEST METHOD, MD : MACHINE DIRECTION ,TD : TRANSVERSE DIRECTION
.png)
